There must be something in the air, because where I am, it seems to be raining babies! The cost of baby shower gifts can certainly add up, so I am always on the lookout for inexpensive, yet unique and thoughtful, gifts for Mama and Baby. For today’s installment of Creating in a Crunch, I’ll show you how to upcycle an item you might very well already have on hand to create a super sweet gift!
For this project, you will need…
An empty beverage carrier
Coordinating patterned papers
Scrapbooking adhesive and/or glue
Paper trimmer and scissors
Ruler and pencil
Chipboard letters and/or letter stickers
Gift items to fill your finished carrier (see below for some ideas)
step 1 / Measure the length and width of all of the sides of your beverage carrier, and trim pieces of patterned paper to these dimensions. Also measure the length and width of the rectangle surrounding the carrying handle of the your holder, as seen below, and trim 2 pieces of paper to these dimensions, one for the front and the back. If one of the sides if your carrier is oddly shaped as mine was, trace the side onto the back of your patterned paper.
step 2 / Trim the flaps away from the carrying handle of your carrier, as shown. Cut out all of the remaining traced pieces, if you haven’t already.
step 3 / Precisely align one of the small handle rectangles in the handle portion of your carrier, with the right side of your paper facing out. Use a pencil to trace the shape of the handle, and then trim this piece away. Adhere this handle piece to your carrier. Repeat on the side of the handle.
step 4 / Adhere your remaining to paper pieces to your carrier to their respective sides in a similar manner, taking care to ensure all sides are precisely aligned. At this point, you can be finished, or you can continue to step 5 and gussy you carrier up a bit!
step 5 / Apply strips of coordinating patterned paper to all sides of your carrier, if desired. (Just be sure when using strips that they are all lined up at each corner of your carrier!) Now, apply chipboard letters and/or letter stickers to the front and back of your carrier. Because I wanted one side of the carrier’s content to be filled with items for Mama and the other with items for Baby, I decided to label mine, “For You,” and “For Baby.” Use your imagination! Finish everything up with a bright bow. Your carrier is finished!